AVM Technologies Named an Official Distributor of 4- and 5-Axis Machining Centers for Aluminum Extrusions.
We're proud to announce that AVM Technologies is now an official distributor of Pertici Industries 4- and 5-axis machining centers for aluminum extrusions, covering North America: the USA, Canada and the Caribbean.
These machines drill, mill, tap and saw aluminum profiles for architectural work like windows, doors, curtain walls and awnings, and for industrial extrusions used in wind turbines, trucks, trailers, boats and more, all in one setup.
The range at a glance:
Compact 4-axis machining centers (P104): the spindle swivels from 0° to 180° to mill, drill, tap and end-mill profiles. Standard working length is 3.2 m and can be doubled. Available with or without motorized clamps. A good fit for window, door and general fabrication shops.
Long-bed 4-axis machining centers (P107): a 7 m working range that can run as one long area or in pendulum mode with two independent zones, so you load one side while the other side machines.
4-axis machining centers with automatic clamps (P307): mill, drill, tap, cut and mark bars in aluminum, PVC, light alloys and steel. Depending on the version, 4 or 8 automatic clamps position themselves along the X axis, so setups go faster with less operator handling.
5-axis machining centers (P527 / P529): in Essential, Premium and Premium Plus versions, with 7 m and 9 m beds. They handle complex cuts on long bars and large parts in aluminum, PVC, light alloys and steel, ideal for industrial extrusions.
Double-head saws: two saw heads cut both ends of a profile at once, each at its own angle, for fast and accurate repeat cutting of frames and long bars.
Multi-spindle ring machine (PX5000): spindles mounted in a ring around the profile drill and mill several faces in one cycle. Built for high-volume, repeat parts where speed counts.
With over 17 years of servicing customers across the same region, we offer more than the machine: application advice, installation, operator training and ongoing service and parts support.
See the full range of machines on our profile machining page.
Looking to add 4- or 5-axis machining to your extrusion shop? Contact AVM Technologies for a quote.
Comments